DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is disabled.
Figure 133. The
System / Telnet
page.
To enable access via TELNET, move the
Enable Telnet
switch to the right. In the
Port
field, enter
the number of the access point's port through which access will be allowed (by default, the port
23
is specified). Then click the
APPLY
button.
To disable access via TELNET again, move the
Enable Telnet
switch to the left and click the
APPLY
button.
Page
164
of 175
