DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Figure 101. The window for changing the settings of the access point's port.
In the opened window, specify the needed parameters:
Parameter
Description
Speed
Data transfer mode.
Select the
A
uto
value to enable autonegotiation.
When this value is
selected, the
Autonegotiation Modes
and
Flow сontrol
sections
are displayed.
Select the
10M-Half
,
10M-Full
,
100M-Half
, or
100M-Full
value
to manually configure speed and duplex mode for the selected port:
•
10M-Half
: Data transfer in just
one direction at a time
(data
can be
either sent or received
) at the maximum possible
rate
of up to 10
Mbps
.
•
10M-Full:
Data transfer in two directions simultaneously
(data can be sent and received at the same time)
at the
maximum possible
rate
of up to 10
Mbps
.
•
100M-
Half:
Data transfer in just
one direction at a time
(data
can be
either sent or received
)
at the maximum possible
rate
of up to 100
Mbps.
•
100M-Full:
Data transfer in two directions simultaneously
(data can be sent and received at the same time)
at the
maximum possible
rate
of up to 100
Mbps
.
Autonegotiation Modes
To enable the needed data transfer modes, move relevant switches to the right.
Page
120
of 175
