PS-28 Cruiser
PS-28N Cruiser
CR-MM-1-0-00
CHAPTER 10 – POWERPLANT
Revision No.: 24
Date of issue: 2020-11-19
10 - 18
Fig. 10-12
: Check of axial propeller running-out
(i) Secure bolt heads (7, Fig. 10-10) by lockwire (see 15.8.2).
(j) Put the propeller spinner (2) on the propeller and attach it with bolts (11) with washers (12).
(k)
Install spark plugs to the engine. Tighten up with torque 20 Nm (
15 ft.lb
); connect the battery.
10.3.5 Engine mount removal
Type of maintenance: heavy
Authorization to perform:
See point 2.5.3.
Tools needed:
-
wrench size 9/16”
-
screwdriver
-
torque wrench
-
cutting pliers, pliers
WARNING:
ENGINE IGNITION MUST BE SWITCHED OFF!
(a) Remove engine cowlings
(b) Disconnect the battery and remove upper line of spark plugs from the engine.
(c)
Remove the engine and all other parts on the engine mount (see CR-MM-1-0-00, chapter
10.3.1, the latest revision)
(d)
Unscrew the nuts (2, Fig. 10-13) and remove the engine mount (1).
