CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 7 – EQUIPMENT
Date of issue: 2018-09-27
Revision No.: 22
7 - 7
WARNING:
UNAUTHORIZED PERSONNEL SHOULD NOT ATTEMPT TO MODIFY,
REPAIR, OR DISASSEMBLE BRS SYSTEM AT ANY TIME. DURING ALL
SERVICE WORK BEWARE OF ACTIVATING THE BRS ROCKET!
NOTE:
BRS parachute must be removed from the aircraft for repacking. This service
date is printed on placards located on the side of center panel and on the
parachute.
(a) Carefully unglue the cover over parachute on the canopy fixed frame.
(b) Remove both instrument panels and disconnect all cable and pitot-static connection.
(c) Remove COMM/NAV equipment from the center panel and disassemble it.
(d) Pull open the front flap of the parachute (1, Fig. 7-5) and expose the small link; unscrew
the link nut and disconnect the rocket lanyards (5).
(e) Carefully remove the BRS rocket (see 7.3.6).
(f) Cut-off cable ties (4) securing link (3) to the tray.
(g) Unscrew the link (3) nut and disconnect the loop of the main brindle (6).
(h) Disengage all four Velcro retaining straps.
(i) Carefully remove parachute (1) from the tray (2).
(j) Repack the parachute by the authorized person.
1 Parachute
4 Cable tie
2 Tray
5 Rocket lanyards
3 Link
6 Main bridle loop
Fig. 7-5
: BRS parachute removal / installation
