CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 99 / 148

Instructions for Useand
M a i n t e n a n c e
Section F
27
Rest mode
The machine is considered to be in rest mode when:
1) The arm and the enclosure are resting on their support plate.
2) There is nobody inside the basket.
3) The power take-off is deactivated.
4) The electrical and hydraulic systems are disconnected.
5) The stabilisers are rested on the ground.
6) The covers and doors are closed.
ATTENTION
When you leave the machine in rest mode you must:
- deactivate and remove the contact keys;
- use the keys to lock all doors and covers which are fitted with locks;
- remove all keys.
ATTENTION
Do not leave tools lying around (out of their tool boxes) to prevent possible:
- mishandling or vandalism by outsiders while the machine is not operating;
- damage to persons or things, during operation.
DANGER
If you have to leave the machine unattended, even momentarily, make sure that it is
always in rest mode.