CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 93 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
21
Closing of aerial part - Frame station manoeuvres
ATTENTION
Carry out manoeuvres from the
frame station only in case of
emergency.
From the frame station, move the selector SA2
to the right "frame controls" position.
- to activate manoeuvres from the frame station, a
few seconds before each individual control, select
the button
SH3 .
- Retract the telescopic elements of the boom
completely with SC3 .
- Orient the telescopic boom perpendicular with the
front support column. Rotate the column by
means of
SC4 , until the red markers on the turret
coincide.
- Position the basket transversally compared to the
telescopic boom. Rotate the basket by means of
SC5 .
The basket must be centred to be able to close
the platform on the support.
- Carefully control descent of the boom with SC2 ,
until it rests on the column.
Insist with this manoeuvre for a few instants with the
control at top speed.
An eye check is always advisable to make sure
the boom is centred perfectly on the column.
SA2
SH3
SH3
SC2 SC3 SC4 SC5
SC2
SC2
SC4
SC5