CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 19 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section B
Residual risks and dangers
During use of the lifting platform
1 Risk of falling tools from an elevated position due to careless movements, with the consequent danger of
impact for the ground-level operator and the persons exposed;
2 Danger of crushing lower limbs (especially feet) during the stabiliser positioning operation for workers
pausing or passing though the operating area if they are not warned in advance of the use of the lifting
platform.
3 Risk of the lifting platform overturning if the positioning obligations and the load limits indicated in this
manual are not observed;
4 Risk of collision with fixed infrastructures and moving objects during platform operation unless the
necessary manoeuvring clearances have been taken into consideration;
5 Risk of collision with consequent crushing and falling hazards for the persons and/or workers present in
a production area situated in a dangerous area, unless they have been warned in advance of the use of
the lifting platform.
Transportation
1 Risk of collision with fixed or mobile infrastructures along the platform’s path, unless the equipment used
for work is not put back in place after use.
Parking
1 Risk, in the event of a momentary absence of the operator, of acts of vandalism if all doors fitted with a
lock are not locked or padlocked.
2 Risk, in the event of a momentary absence of the operator, that unauthorised persons may operate the
lifting platform unless the electrical and hydraulic systems are disabled.
Maintenance
1 Risk of yielding of parts of the lifting platform, with the consequent danger of crushing and fall, if operations
are performed that have not been authorised by the manufacturer or if work is performed in workshops
not authorised by CTE
2 Risk of yielding or breakage of parts of the lifting platform, with the consequent danger of crushing and
fall, if parts or items are replaced with non-original spare parts.
3 Risk of leaks or pressurised fluid (oil) if incorrect work and/or work not authorised by the manufacturer is
performed on the hydraulic system or if such work is performed in workshops not authorised by CTE