CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 98 / 148

Instructions for Useand
M a i n t e n a n c e
Section F
26
TRANSPORT OR START UP CONFIGURATION
The machine is considered in a transport or start up configuration when:
1)
arm and basket lean on the column;
2) stabilizers and outriggers are completely returned within the motor vehicle shape;
3) nobody is in the basket;
4) power take off is not connected;
5) electrical and hydraulic equipments are not connected;
6) bonnets and doors of extensible platform are locked.
ATTENTION
for transport or start up configuration, be sure that the safety split pin is connected
to the pivot A (see picture 01).
ATTENTION
Do not leave any equipment out of its own seat (equipment box) in order to take
precautions against possible impediments as follows:-vandalisms or violations by
the way of extraneous people during machine lock.-damages toward people or things
during start up.
During start up phase, it is highly recommended to avoid each hard braking and sudden accelerations
keeping a constant and moderate speed.
C
A
Fig.01