CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 10 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section A
Composition of the manual
Each page in this manual is ordered according to the applicable section it belongs to.
This means that the page numbers start from 0 again for every section.
A letter identifying the section can be found on the top right hand corner of every page, followed by the actual
page number.
Each section is divided up into chapters (in turn divided up into paragraphs and sub-paragraphs).
The entire manual is subdivided into 14 sections:
A Information about the manual
B Safety
C Technical description and data
D Controls
E Safety devices
E1 Devices (Optionals)
F
Procedures for use
G Anomalies
H Maintenance
H1 Demolition and disposal
L
Assistance and warranty
N Emergency manoeuvres
P Enclosed documentation
S Certificates
Description of the sections
- Section A describes the structure of the manual and how it is divided up.
- Section B includes the safety requirements and the main safety norms to observe when using the lifting platform.
- Section C includes the data, performance and technical characteristics of the lifting platform.
- Section D describes the function of the controls and tools installed on the lifting platform.
- Section E lists the general and safety devices installed, and describes their relevant characteristics.
- Section E1 lists the optional safety devices and other installed devices, describing their relevant characteristics.
- Section F describes the operating phases and the instructions for use intended for the personnel in charge of operating
the lifting platform.
- Section G explains how to recognise and troubleshoot those anomalies that can be dealt with directly by the operator
in charge of moving the platform.
- Section H includes the main maintenance operations, with an indication of the recommended timing.
- Section H1 includes instructions for disposal and demolition of the material that the platform is made of.
- Section L includes the forms to fill in after all scheduled maintenance work or after extraordinary maintenance work is
performed on the machine.
- Section N includes the main emergency operations to perform if necessary.
- Section S includes some certifications that will be enclosed with the platform.
- Section P includes the enclosures, the hydraulic and wiring diagrams of the machine.