CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 63 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section E 11
Basket balancing
ATTENTION
Balancing is only activated when
the platform is not moving and
when the basket is centred
lengthwise.
Verticality of the basket is assured by two close-circuit
cylinders.
The planarity of the basket can be corrected if it loses
perfect planarity while functioning.
ATTENTION
Vertical correction of the basket
must be performed exclusively
while the platform is at rest.
To re-establish balance, keep the button at the top of
one of the two joysticks pressed and at the same
time act on the
SC10 control in the basket
SC10 Basket balance control
1 Negative swinging of the basket
2 Positive swinging of the basket
In case of malfunctioning or failure of the basket
balance system, a further device composed of a
mercury bubble causes blockage of balancing
correction manoeuvres, as well as blocking the
manoeuvre which further unbalances the basket.
The inclination of the basket must not exceed 10
degrees positive or negative.
CHECKING THE WORKING OF THE SAFETY DEVICE
AActing on the selector SC10, incline the basket until it blocks in both directions. To carry out
this operation safely, act inside of the basket with the platform at the rest position. If the system
corrects the horizontal position automatically, (independently from the will of the operator),
select the opposite correction by means of the selector SC10. If this does not work, activate the
emergency button, retract the platform to safety conditions and contact the CTE authorised
workshop immediately.
ON
OFF
ON
ON
BZ202682
SC10
SJ1
SJ2
1
2