CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 112 / 148

Section H
GEAR MOTOR OIL LEVEL CHECK/CHANGE
PLATFORM CONFIGURATION FOR THE OPERATION:
MAINTENANCE:
TOOLS
PERIODIC INTERVENTION
WARNING
WHO MAKE THE MAINTENANCE
MAINTENANCE
Any position that permite to access to the gear motor
THE EQUIPMENT
DURING THE OPERATION AVOID THAT IMPURITY AND
DIRTINESS GET INSIDE THE GEAR MOTOR
FINAL USER / AUTHORIZED WORKSHOP
- Topping up the oil:
Pour in the oil through the hole of the cap B until the oil is visible in the hole " B ".
- Change of oil Unscrew the cap B , open the cap C , wait until the oil leaks out
completely, clean the cap C and screw it again.
Pour in approximately quantity (*) of oil through the hole of the cap B and screw
it again.
OIL AND GREASE SPECIFICATIONS
C
B
- 2 0 ° C + 2 5 ° C 7 . 3
1 0 . 8 - 1 2 . 5
1 5 - 1 8
2 2 - 2 6
1 0 0
I S O VG ° E / 5 0 ° C
V I S C O S I T Y ENVIRONMENT
TEMPERATURE
1 5 0
2 2 0
3 2 0 + 5 ° C + 4 0 ° C
- 3 0 ° C + 6 5 ° C
- 4 0 ° C + 6 5 ° C
EACH MONTH OR EACH 00 WORKED HOURS
(*) see technical sheet for specifications SECTION C on user manual.