CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 35 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section C
5
Main data plates
21.5
323276
200
kg
kg
40
kg
160
+
=
+
323276
120
kg
kg
40
kg
80
+
=
+
93
dB
L
WA
323356
Max forza manuale ammessa (N)
Max. fuerza manual admisible (N)
Max allowable manual force (N)
Max. zulassige Handkraft (N)
Effort horizontal max admis (N)
Max manuele kracht (N)
Forca manual maxima permitida (N)
Max velocita' vento ammessa (m/s)
Velocidad del viento admisible (m/s)
Max allowable wind speed (m/s)
Max. zulassige Windgeschwindigkeit (m/s)
Vitesse max du vent admise (m/s)
Max toegelaten windsnelheid (m/s)
Velocidade maxima de vento permitido (m/s)
BZ323433
400
12.5
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
320136
BEFORE OPERATING THE MACHINE ENSURE THE OPERATOR
HAS READ AND IS FULLY CONVERSANT WITH THE OPERATION
AND MAINTENANCE MANUAL
BEFORE OPERATING THE MACHINE ENSURE THE OPERATOR
HAS READ AND IS FULLY CONVERSANT WITH THE OPERATION
AND MAINTENANCE MANUAL
BEFORE OPERATING THE PLATFORM ENSURE A RISK ASSESMENT HAS BEEN
CONDUCTED TO ENSURE THE SAFE USE OF THE PLATFORM.
ENSURE THE MACHINE IS IN A SAFE AND WELL MAINTAINED CONDITION BEFORE
OPERATION. CONDUCT A PRE OPERATION CHECK AND ENSURE ALL MACHINE
FUNCTIONS OPERATE CORRECTLY.
ENSURE THE WORKING AREA IS FREE FROM OBSTRUCTIONS AND POWERLINES. ALSO
ENSURE THERE ARE NO OVERHEAD CRANES OR GANTRIES IN THE WORKING AREA.
REFER TO THE OPERATION MANUAL FOR SAFE OPERATING DISTANCES FROM
POWERLINES.
ENSURE THE AREA BELOW AND AROUND THE MACHINE IS PROPERLY CORDONED OFF TO
PREVENT ACCESS TO UNAUTHORISED PERSONEL AND VEHICLES.
SWITCH HAZARD BEACONS ON WHEN OPERATING MACHINE.
ENSURE THE STABILIZERS ARE CORRECTLY DEPLOYED ON FIRM LEVEL GROUND, WITH
THE BUBBLE LEVEL CENTRED. CHECK THE GROUND BEARING CAPACITY, AND USE
CHOCKS AND LOAD SPEADER BOARDS ON ANY SURFACE OTHER THAN HARD CONCRETE.
CHECK THE PERSONS AND ANY ADDITIONAL EQUIPTMENT ARE WITHIN THE SWL OF THE
PLATFORM. DO NOT PLACE ADDITIONAL ITEMS IN THE PLATFORM WHEN ELEVATED.
WHEN CLIMBING INTO THE WORK PLATFORM ONLY USE THE ACCESS STEPS AND
HANDRAILS PROVIDED. DO NOT CLIMB INTO THE WORK PLATFORM FROM ANY OTHER
POSITION.
ALWAYS WEAR FALL RESTRAINT TYPE SAFETY HARNESSES, AND ONLY ATTACH THEM TO
THE POINT PROVIDED. DO NOT USE FALL ARREST TYPE HARNESSES.
IN CASE OF EMERGENCIES, ONLY TRAINED AND AUTHORISED PERSONEL TO OPERATE
EMERGENCY CONTROLS.
ALWAYS ENSURE THERE IS A TRAINED AND AUTHORISED PERSON AT THE GROUND
POSITION,
NEVER OPERATE THE MACHINE IN WIND SPEEDS IN EXCESS OF 12.5m/s (28mph).
DO NOT USE THE MACHINE AS A LIFT TO MOVE PERSONS OR MATERIALS FROM ONE
POSITION TO ANOTHER. DO NOT USE THE VEHICLE TO CARRY GOODS OR MATERIALS.
DO NOT ALLOW THE MACHINE TO COME INTO CONTACT WITH EXTERNAL STRUCTURES
AT ANY TIME. DO NOT EXCEED THE REACH OF THE PLATFORM WITH THE USE OF
LADDERS OR ANY OTHER MEANS.
A
2
1
A
FOR THE OPERATORS’ SAFETY
AND A CORRECT STABILIZATION,
THE STOWED OUTRIGGERS ( 1 )
OR COMPLETELY EXTENDED ( 2 )
WILL HAVE TO BE LOCKED
THROUGH THE PIVOT A .
FOR VERSION WITH HE CROSS-BEAMS
ATTENTION: IN ORDER TO NOT DAMAGE ANY MECHANICAL PART, IT IS NECESSARY TO CENTRE THE BASKET,
WHICH MUST NOT BE ROUNDED, BEFORE THE MACHINE REST ON THE SUPPORT.