CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 80 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
8
Sta Sta
Sta Sta Stabilisa
bilisa
bilisa bilisa bilisation - w
tion - w
tion - w tion - w tion - wor
or
or or ork ar
k ar
k ar k ar k areas with HE beams
eas with HE beams
eas with HE beams eas with HE beams eas with HE beams
The machine with manually extendible outriggers can work either with the crossbars extended or
closed, depending on the customer, either on the right side or the left.
Any combination is allowed. Based on the stabilisation combination chosen by the operator, the
system will automatically estimate the corresponding work area depending on the rotation angle of
the turret, maintaining machine configuration always in safety.
However the two right or left crossbars must be extended the same way (symmetrical stabilisation),
in order to obtain maximum performance in the area in which the crossbars will be extended.
If machine stabilisation is not symmetrical (i.e. on one side a beam is open while the other is closed),
it will not be possible to obtain maximum performance and the system will estimate a smaller work
area.