CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 85 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
13
Manual stabilisation manoeuvres with HE cross-beams Manual stabilisation manoeuvres with HE cross-beams
Manual stabilisation manoeuvres with HE cross-beams Manual stabilisation manoeuvres with HE cross-beams Manual stabilisation manoeuvres with HE cross-beams
After having assessed the real solidity of the ground where one must work, it is necessary:
A
A
FROM THE INITIAL CONDITION OF
OUTRIGGER COMPLETELY REFRAINED
UNLOCK THE OUTRIGGER:
1) REMOVE THE SAFETY SPLIT PIN C ;
2) ROUND THE PIVOT “ A ”
LEVER AND SIMULTANEOUSLY,
TRHOUGH THE PROPER HANDLE,
START TO UNTHREAD THE OUTRIGGER.
THE PIVOT “ A ” WILL HAVE
TO BE ROUNDED 180
DEGREES FROM THE
INITIAL CONDITION.
C
A
For version with
HE cross-beams
ATTENTION
With outriggers and beams out of position, the light H3 in the cabin should be on