CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 96 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
24
Disconnect any outside auxiliary networks which the platform may be connected to (electrical, water,
pneumatic systems, etc.).
ATTENZIONE
Make sure that when the outriggers and beams are completely retracted, the light H3
in the cabin is off.
RELEASE THE OUTRIGGER
FROM THE INITIAL
CONDITION AND, THEREFORE,
OUTRIGGER COMPLETELY EXTENDED
CONDITION:
1) REMOVE THE SAFETY SPLIT PIN C ;
2) TURN 180 DEGREES THE PIVOT A LEVER.
CLOSE COMPLETELY THE OUTRIGGER.
THE PIVOT A WILL HAVE TO BE POSITIONED
AT THE INITIAL CONDITION LOCKING
THE OUTRIGGER.
CONNECT THE SAFETY SPLIT PIN C .
A
A
C
A
C
A
For version with
HE cross-beams
Retraction of stabilisersfor version with HE cross-beams