CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 60 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section E 8
The red light H3 on the cabin control panel turns on
if the outriggers and/or beams should be out of
position (not totally retracted).
This device allows the operator to carry out a further
check if the platform is in transport conditions. In that
configuration the light
H3 must be off.
Outriggers and/or beams out of position
CHECKING THE WORKING OF THE SAFETY DEVICE
To check this safety device, make sure that in any condition where the beams and/or the outriggers
are out of position, the light H3 on the cabin control panel will be on.
P
H3