CTE B-LIFT PRO Series, Instructions For Use And Maintenance Manual, Page: 90 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
18
Development of aerial part - Frame
station manoeuvres
ATTENTION
Carry out manoeuvres from the
frame station only in case of
emergency.
From the frame station, move the selector SA2
to the right “frame controls” position. In order to
activate manoeuvres from the frame station a few
seconds before each individual control, press the
button
SH3 .
Activate the selector SC2 to lift the boom. Intervene
on manoeuvres described in chapter
“ Main controls - Section D ”.
ATTENTION
Carry out manoeuvres
individually to keep equipment
stress at a minimum.
Boom lifting from the support column inhibits
stabilisation movement.
Therefore if the horizontal position of the platform
must be corrected, the boom must be brought
back onto the column.
Stopping manoeuvres
If needed, the operator can immediately interrupt
manoeuvres pressing the red emergency button
SB1 .
To restore normal functioning, just carry out a semi-
rotation as indicated by the arrows on the button.
ON
M
OFF
M
α
α
%
H
+ -
SET ESC
80 0 80 13.6
SA2
SH3
SC2
SB1