5-4
ClosureRFG Radiofrequency Generator
Export—RF Treatment Data Storage
The treatment history screen appears.
Treatment history screen
3 data records are selected
Treatment
Total mm:ss RF cycle (s)
09-07-2012 08:12 CLF 3:00 9
09-07-2012 09:12 CLF 3:40 11
09-07-2012 15:32 CLF 12:00 3
09-06-2012 10:10 CLF 3:40 11
09-06-2012 13:32 CLF 4:00 12
09-06-2012 16:42 CLF 4:00 12
09-05-2012 09:18 CLF 3:20 10
09-05-2012 10:30 CLF 4:00 12
09-04-2012 12:20 CLF 4:40 14
09-04-2012 15:10 CLF 4:20 13
1
3
4
5
2
Select all
Export
There are up to 5 pages of history, which can be changed in the Generator Setup
screen. The latest record is at the top of page 1. When entering this screen, all entries
not exported so far are already selected.
4. Perform one of the following actions
a. If the selection is correct, go to step 5, below
b. To remove entries from export, press the circled checks on the left of the items.
c. To add entries to export, press the open circles.
d. Press
Select All
to select the complete list.
e. Press
Select All
again to get a Clear All button, if needed.
5. Press
Export
to export the data to the USB.
Note:
The next time this screen is entered, all records not previously exported will be
checked.
Note:
If the USB is full, or no records are selected, a message states “No records
exported.” Insert a different USB card or select records to export.
6. Remove the USB device
7. Insert another USB device, or attach the rubber port cover.