![background image](http://html1.mh-extra.com/html/covidien/closurerfg/closurerfg_operation-manual_2673930023.webp)
Important
If the ClosureRFG generator fails to display the “Connect Device” message or sound the power-on
tone, do not use the ClosureRFG generator. Refer to Chapter
8,
Troubleshooting
.
Closur
eRFG Generator Setup
ClosureRFG Radiofrequency Generator
2-3
Applying AC Power
Standby Screen
When the system has powered up and no catheter is connected, the ClosureRFG
radiofrequency generator displays “Please Connect the Device (before insertion into
body).” The standby screen is shown in the following illustration.
The Options button (lower left) and Treatment History button (lower right) appear.
Power-on standby screen
RFG3 Version X.X.X
Please Connect the Device
(Before inserting into body)
1
2
The screen is divided into two areas with the data area above the message area.
The data area displays: measurements (temperature, power, impedance, and time);
version and copyright; and treatment information.
ཱ
The message area displays: acknowledgements when a button is pressed;
informational messages; instructions; and error messages [e.g., Please Connect the
Device (Before inserting into body)].
Note:
To ensure safe RF delivery, it is important to be familiar with how the ClosureRFG
generator works, how to change desired settings, and how to interpret displays.
Press the
Options
button
on the lower-left side of the touchscreen. The Generator
Setup screen will appear. When in the Generator Setup screen, the Options button is
replaced by the Home button.