background image

3-2

ClosureRFG Radiofrequency Generator

Ready-to-Treat Screen

RF Power:

 Indicates RF power actively applied to the catheter.

Treatment Summary:

 Indicates the total time and number of treatment cycles since 

reset, power on, or change of catheter, as minutes:seconds.

ClosureFast Catheter Gauges

Data Display with Gauges

Gauges indicate the measured parameter and whether the catheter’s parameters 
(temperature and RF power) are within acceptable ranges. If a parameter is outside the 
advisory limits, its gauge brightens within the red area or lights only the blue area, a 
message is displayed, and a tone is sounded.

ClosureFast gauges during treatment

ClosureFast

Total

00:00 m:s  0 RF Cycle(s)

0:10

s

1

2

The illumination of the 

temperature

 gauge segments:

Blue:

 Cool; waiting for, or at the beginning of a heating cycle; or low during 

treatment

Blue-Green:

 Within normal range after initial heating

Red:

 Temperature above advisory or functional limit

The illumination of the 

power

 gauge segments:

Blue:

 Low but within limits

Blue-Green: 

Within normal range

Red:

 Power above advisory or functional limit

Summary of Contents for ClosureRFG




































































































Reviews: