Contec FX-DS110-APE, User Manual, Page: 99 / 132

AP Maintenance
FX-DS110-APE
88
(6) Using the Xmodem protocol, send the firmware you prepared
in step 2.
(For example, if you are using HyperTerminal, select “File
Transfer” from the “Transfer” menu, specify the name of the
firmware file you prepared in step 2 and select the Xmodem
protocol, then click the send button.)
(7) Reboot the AP after it finishes reading the firmware.
(Change the INIT switch back to OFF before rebooting.)
Using TFTP to Reboot the AP
(1) Start TFTP.
(2) Select “Send Reset Command to AP”, then click the “OK”
button.
(3) Enter the IP address of the AP in the “IP Address of AP to
Reset” field.
(4) Click the “OK” button, then exit.