Contec FX-DS110-APE, User Manual, Page: 67 / 132

Setup Preparation
FX-DS110-APE
56
(2) Select [1. IP Address] and enter the IP address assigned to the
AP on the wired LAN.
(3) Select [2. Sub-Net Mask] and enter the sub-net mask for the IP
address set in step 2.
(4) Enter [M] to return to the previous menu and select
[1. Parameters]
Figure 5.12. IP Address Setting Screen (2)
(5) Select [1. Default Gateway] and enter the IP address of the
default gateway.
You do not need to enter an IP address if there is no default
gateway.
(6) Press the [W] key or return to the top menu and select
[3. Writing] to save the settings, then enter [BYE] or return to
the top menu and select [1. Exit] to disconnect the terminal.
This completes network setup. You can now use a web
browser for setup and perform network management using
SNMP.