Contec FX-DS110-APE, User Manual, Page: 111 / 132

SNMP Agent Functions
FX-DS110-APE
100
Building-in to SNMPc
Follow these steps to install SNMPc Ver. 4.
(1) Start the SNMPc Setup program.
To start SNMPc Ver. 4, select [Start] – [SNMPc 4.0] – [Setup].
After startup, verify the user registration information.
(2) Insert the Maintenance Tools(2/2) floppy disk provided with
this product into the floppy disk drive. Enter the floppy disk
drive path name followed by SNMPc.4\, and click 'OK.'
Example: If the floppy disk drive is the A: drive, enter
A:\SNMPc.4\
(3) Select [CONTEC FLEXLAN Series] , and click [OK] to start
installation.
(4) When the following message appears, click [No] to exit the
program.
[Do you want to install additional vendors?]
MIB Database Updates
After installing a new vendor, you will have to update the MIB
database the next time SNMPc is started.
Follow these steps to update the MIB database. In this description
we use 'SNMPc Ver.4' as an example.
(1) Start SNMPc.
To start SNMPc Ver. 4, select [Start] – [SNMPc 4.0] –
[SNMPc].
(2) Click [Yes] to update the MIB database.
(3) When you are finished updating the MIB database, click [OK].
The build-in to SNMPc is not complete.