Contec FX-DS110-APE, User Manual, Page: 68 / 132

Setup Preparation
FX-DS110-APE
57
Setup Using a Web Browser
You can setup the AP software from a PC running a web browser
via the LAN or a modem. As this provides a graphical interface,
setup using a web browser is much easier than using a terminal.
The factory default IP address for the AP is listed on the underside
of the case. You can use this address to connect to the AP from a
web browser but this requires that you change the IP address of the
PC to be in the same network group as the AP’s IP address (when
finished, set the IP address back to its original value). If you do
not wish to change the IP address on the PC, use a terminal to
connect to the AP and set the IP address. See “Explanation of Top
Menu and IP Settings” in this chapter for details of how to set the IP
address using a terminal.
Supported web browsers (recommended)
- Microsoft Internet Explorer 3.0 or higher
- Netscape Navigator 3.0 or higher
In addition to the above browsers, browsers that support frames
(HTML 2.0) can also be used.
Figure 5.13. Example Browser Setting Screen