Contec FX-DS110-APE, User Manual, Page: 69 / 132

Setup Preparation
FX-DS110-APE
58
Connecting to the Web Browser PC
When using a web browser to setup the AP, you can connect via
either a LAN or a modem. Use the following procedure to connect
the web browser.
Connecting via a LAN
(1) Connect the PC on which you will run the web browser to the
same network as the AP.
Alternatively, you can use a UTP cable to connect the PC
directly to the AP. In that case, use a crossed-cable.
The connection will not work if you use a standard straight-
through cable.
Connecting via a modem
(1) Connect modems to the AP and to the PC on which you will
run the web browser.
Use a COM port to connect the modem.
(2) Connect each modem to a telephone line and establish a
connection from the web browser PC to the modem connected
to the AP.
For Windows 95, use the standard dialup network function to
establish the connection.
Windows Setup Screen
- No compression
- Fixed IP address
- No authentication
- No login
Note!
You may not be able to establish a connection if the web browser is
setup to use a proxy. In this case, change the setting to not use a
proxy.
Remember to change the proxy setting back when you have finished
setting up the AP.