Contec FX-DS110-APE, User Manual, Page: 43 / 132

Installation Method
FX-DS110-APE
32
Setup
Table Top Installation
Use rubber feet
If installing on a desktop, place the unit on a stable and flat base
and ensure that adequate space is provided for ventilation (5cm).
As far as possible, locate the unit in a high place with an
unobstructed view as this gives better radio transmission and
reception performance and increases the operating range. Also, as
locating the unit (antenna) too close to concrete or metal walls
(including steel frames) causes a reduction in communication
quality, ensure a gap of at least 30cm.
The ventilation slits
Figure 4.2. The Ventilation Slits
Note!
Do not obstruct the ventilation slits. This can cause the
temperature inside the product to rise and can damage the
components inside.
Caution!
Do not place the FX-DS110-APE upside-down. This will cause
heat to accumulate and possible cause fire.