Contec FX-DS110-APE, User Manual, Page: 70 / 132

Setup Preparation
FX-DS110-APE
59
Connecting to an FX-DS110-APE
To connect the web browser to the AP, the IP address of the PC on
which you run the web browser must be in the same network group
as the IP address of the AP. The factory default IP address set in
the AP is always in the class A network group starting with [10]
(that is, 10.xxx.xxx.xxx). Accordingly, set the IP address of the
PC to also start with [10] ([IP 10.1.1.1, MASK 255.0.0.0], for
example). Remember to set the IP address of the PC back to its
previous value after you have finished with the connection for
setting up the AP. When setting up the AP, it is recommended that
you change the IP address of the AP.
(1) Start the web browser
Recommended web browsers are Microsoft Internet Explorer
3.0 or later and Netscape Navigator 3.0 or later.
(2) After starting the web browser, enter the IP address of the AP
in the URL field.
For example, if the IP address of the AP is [10.66.1.1], enter
the following:
http://10.66.1.1/
Refer to Chapter 6 below as you perform software setup.