96 - VPN | OpenVPN Server Settings Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
7.
Save Settings
Press
Apply
to activate settings.
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
OpenVPN Server Settings
Encryption Mode
Select the encryption
•
Static
: Use a pre-shared static key.
•
TLS
: Use SSL/TLS + certificates for the authentication and key
exchange.
Port
Enter the port number that your VPN service uses.
Tunnel Protocol
You can choose use to
TCP
or
UDP
to establish the VPN connection.
Encryption Cipher
Select the encryption cipher from
Blowfish
to
AES
.
Hash Algorithm
Select the hash algorithm:
SHA1
,
SHA256
,
SHA512
, or
MD5
.
Ping-timer-rem
Select to enable or disable the ping-timer-rem function, which prevents
unnecessary restarts at the server/client when the network fails.
Persist-tun
Select to enable or disable the persist-tun function, which keeps the
tun(Layer 3)/tap(Layer 2) device linked up after the
Keepalive
timeout
occurs. The default value is
Enable
.
Persist-key
Select to enable or disable the persist-key function, which keeps the first
key to use if VPN restart after
Keepalive
timeout, default value is
Enable
.
Use LZO
Compression
Select whether to use the LZO Compression function to compress data to
decrease the traffic but it also needs more CPU. The default value is
Disable
.
Keepalive
Select to enable or disable the
keepalive
function, which is used to detect the
status of connection. The default value is
Enable
.
Ping Interval
Enter the ping interval. The range is from 1~99999 seconds.
Retry Timeout
Enter the retry timeout. The range is from 1~99999 seconds.
Ifconfig
Enter the tunnel IP address that VPN uses.
Route
Enter the route IP and Mask. This is the target IP domain you can access
through the VPN tunnel.
Save Log File
You can save an OpenVPN Server log file.
Beta
Version
