58 - System | NAT Settings | DMZ Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
After selecting
Apply
to activate the settings you can then see the entries you configured in the table below.
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
System | NAT Settings | DMZ Page
The DMZ (Demilitarized Zone) page is used to provide Internet services without sacrificing unauthorized
access to its local private network. Typically, the DMZ host contains device accessible to Internet traffic, such
as Web (HTTP) servers, FTP servers, SMTP (e-mail) servers, and DNS servers.
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
Protocol
Configure the protocol type: TCP, UDP or Both (TCP and UDP).
Port Range
Configure the port range of the LAN, the traffic from the public port is
redirected to these port.
Comment
Add supporting information for the entry.
DMZ Page
Enable DMZ
Select the check box to enable this feature.
DMZ Host IP
Address
Enter the IP address of the DMZ host IP address. This is the DMZ
computer’s IP address. If you configure the DMZ function for your office
network, you should get approval from the IT administrator.
Port Forwarding Page (Continued)
Version
