RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Overview - 116
Configuration Using the Command Line Interface
(CLI)
Overview
The RocketLinx WR7802-XT Series provides a Command Line Interface (CLI) that you can access through a
Telnet or SSH connection. The SSH connection can secure all the configuration commands you send to the
WR7802-XT. SSH is a client/server architecture while the WR7802-XT is the SSH server. When you want to
make SSH connection with the WR7802-XT, you can use PortVision DX or download an SSH client tool.
After accessing the CLI, you can view system information, show the status, configure the WR7802-XT and
receive a response back from the system by keying in commands.
If you have not done so, you need to program the WR7802-XT IP address to meet your network requirements.
The easiest way to configure the IP address is using a Windows system and PortVision DX, which is discussed
in
Configuring the Network Settings
This section provides the following information:
•
Accessing the CLI through an SSH Client
(below)
•
Accessing the CLI through PortVision DX
•
•
•
•
Accessing the CLI through an SSH Client
If you want to use your own SSH client to access the CLI, you need the following default information about
the WR7802-XT:
•
IP address: 192.168.250.250
•
Subnet mask: 255.255.255.0
•
IP gateway: 192.168.250.1
•
Login: admin
•
Password: admin (default)
Beta
Version
