118 -
CLI Introduction
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Command Line Interface (CLI)
If you selected
SSH
, click
Yes
to the security alert.
•
Enter the user name (default =
admin
).
•
Enter the password (default =
admin
).
CLI Introduction
There are several different command sets. Each command set has its own access ability and available
command lines. These command sets are:
list
: Use this read-only command to list the available commands.
show
: Use this is read-only command to show the current setting and status of the WR7802-XT.
set
: This is the write command to change the current setting.
del
: This is Delete command to delete the applied settings.
exit
: To exit the CLI.
Note:
Use the
TAB
key can help you find the correct command and complete the command to make the read or
write easier.
Command List
You can view the available command by pressing the
TAB
key.
The commands have these definitions:
•
archive downloads-sw
- upgrades the firmware on the WR7802-XT
•
config
- backup or restore the WR7802-XT configuration file
•
del
- delete settings for one or more of these configuration settings: IPSEC settings, log list (system log),
OPCUA settings, OPENVPN settings, or remote settings
•
exit
- exits the CLI
Beta
Version
