Comtrol WR7802-XT Series, User Manual

Page: 55 / 128

RocketLinx WR7802-XT Series User Guide : 2000638 Rev. A System | Traffic Shaping Page - 53
Configuration Using the Web User Interface
System | Traffic Shaping Page
Use the Traffic Shaping page to specify the incoming and outgoing traffic limit.
Note: You must Save ( Page 115 ) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
System | Outbound Firewall Submenu
Use the following firewall settings pages to configure the firewall setting. There are different types of firewall
settings:
• Src IP Filtering ( Page 54 ) : Source IP address filtering from your LAN to Internet through the gateway.
•
Dest IP Filtering ( Page 54 )
: Destination IP address filtering from the LAN to Internet through the gateway.
• Src Port Filtering ( Page 55 ) : Source port filtering from the LAN to Internet through the gateway.
•
Dest Port Filtering ( Page 55 )
: Destination ports filtering from the LAN to Internet through the gateway.
Traffic Shaping Page
Enable Traffic
Shaping
Select the item to activate the feature. After enabling traffic shaping, you
can configure the
Incoming Traffic Limit , Incoming Traffic Burst , Outgoing
Traffic Limit and Outgoing Traffic Burst .
Incoming Traffic
Limit If necessary, enter a suitable value for this parameter. The range is 100
to 1024000.
Incoming Traffic
Burst If necessary, enter a suitable value for this parameter. The range is 0 to
1024000.
Outgoing Traffic
Limit If necessary, enter a suitable value for this parameter. The range is 100
to 1024000.
Outgoing Traffic
Burst If necessary, enter a suitable value for this parameter. The range is 0 to
1024000.
Beta
Version