112 - Management | LLDP Configuration Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
Management | LLDP Configuration Page
The WR7802-XT supports topology
discovery or LLDP (IEEE 802.1AB Link
Layer Discovery Protocol) which can help
you to discovery a multi-vendor’s
network device on same segment with an
NMS (Network Management System)
device which supports LLDP function.
When the LLDP function is enabled, the
NMS can easier maintain the topology
map, display port ID, port description,
system description, VLAN ID, and so
forth. Once a link failure occurs, the
topology event change can be updated to
the NMS as well. The
LLDP Port State
displays the neighbor ID and IP learnt
from the connected devices.
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
LLDP Configuration
Enable LLDP
Set this to
Enable
to enable LLDP on the router or to
Disable
to disable the
LLDP function.
LLDP Timer
This setting determines how frequently (in seconds) the router sends out
LLDP discovery packets. Valid values are 5 to 254 and default is 30.
LLDP Holdtime
This setting determines how long in seconds the WR7802-XT retains LLDP
neighbor information. Valid values are 10 to 255 and the default is 120.
Apply
Click the
Apply
button to apply the configuration changes or click the
Cancel
button to discard any changes.
LLDP Port State
This table shows the LLDP neighbors for which the router is currently
aware.
Local Port
The router port to which the neighbor is connected.
Neighbor ID
The MAC address of the LLDP neighbor.
Port Description
A description of the what is connected to a port.
Neighbor IP
The IP address of the LLDP neighbor
Neighbor VID
The VLAN to which the LLDP neighbor is connected.
Refresh
Click the
Refresh
button to update the information in the table.
Beta
Version
