48 - System | IP Settings Page
RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Configuration Using the Web User Interface
Note:
You must
Save
) settings, if you want to maintain these settings if the WR7802-XT is rebooted.
IP Settings Page
LAN IP Address Settings
Use DHCP
If you select this option, the router allows a DHCP server to assign an IP
address.
Use Static IP
Address
If you select this option, enter a valid address in the
IP Address
field.
IP Address
The IP Address field allows you to set the static IP address on the
WR7802-XT. The default IP address is 192.168.250.250.
Subnet Mask
You can change the subnet mask address for the LAN interface. The
default subnet mask is a Class C address: 255.255.255.0.
Gateway IP Address
You can change the gateway address. The default gateway address is
192.168.250.1. This is the system gateway IP address when Cellular is
not available.
DNS 1/2
The Domain Name System (DNS) is a hierarchical naming system built
on a distributed database for computers, services, or any resource
connected to the Internet or a private network. It associates various
information with domain names assigned to each of the participating
entities. Most importantly, it translates domain names meaningful into
the numerical identifiers associated with networking equipment for the
purpose of locating and addressing these devices worldwide.
IPv6 Address
This field allows you to enter an IPv6 address to add to the management
VLAN. By default the management interface automatically configures
with a link-local address. Click the
Add
button to add the entered
address to the management VLAN.
Prefix Length
This field allows you to indicate what part of the IPv6 address is used for
routing. Click the
Apply
button to set the entered default gateway.
IPv6 Default
Gateway
The default gateway IP address identifies the gateway (for example, a
router) that receives and forwards those packets whose addresses are
unknown to the local network. The agent uses the default gateway
address when sending alert packets to the management workstation on a
network other than the local network.
IPv6 Address
This table shows the IPv6 addresses that have been added to the
management VLAN. To remove an entry click the check box next to it
and click the
Remove
button. To reload the list click the
Reload
button.
IPv6 Neighbor Table
Neighbor
The IPv6 address of the neighbor.
Interface
The port that the neighbor is connected to.
MAC Address
The MAC address of the neighbor.
State
The Neighbor connection state of the neighbor entry.
Beta
Version
