CRS-500 1:N Redundancy System
Revision 4
Ethernet Interface Operation
9–19
MN-CRS-500
NTP Configuration
Primary/Secondary NTP Server –
Enter the IP address of the primary and secondary NTP
(Network Time Protocol) server.
The secondary NTP server feature may be disabled by entering an invalid IP
address such as 0.0.0.0.
NTP Enable/Disable –
Select Enabled or Disabled from the drop-down list to enable or disable
the NTP feature.
Click
[Submit]
to save.
Bulk Information (read-only)
Bootrom
– The selected
Current Active Firmware Image
is identified here by its
Description
(i.e., its part number, e.g.
FW-0000322
); its
Version
(e.g., 1.2.4); and its (release)
Time
and
Date
(e.g.,
17:18:35 8/8/13
).
Bulk 1
/
Bulk 2
– The Bulk Firmware is identified as it is loaded into the
Bulk #1
and
Bulk #2
image slots, in the same format as the active Bootrom listing.
Summary of Contents for CRS-500
