CRS-500 1:N Redundancy System
Revision 4
Firmware Update
6–11
MN-CRS-500
•
For ZIP files:
o
Click
[Open]
to open the archive file. Use the WinZip features to select the files
for extraction to your destination folder.
o
Click
[Save]
to download the ZIP file to your Windows Downloads folder. Once
the download is complete the dialogue prompts you to either
[Open]
the archive
file, or to open or view the Windows Downloads folder for further action.
8. If not already done with
File Download > Open
, you must extract, at a minimum, these
files (filenames are subject to change):
•
FW-0000389X-#.#.#.bin
(bulk image file for the CDM-625 or CDM-625A)
–OR–
FW-0000476X.bin
(bulk image file for the CDM-750 or CDM-760)
•
CRS-500 Switch Controller for CDM-XXX #.#.# Release Notes.pdf
(modem-
specific firmware release notes).
9. Confirm availability of the firmware files in the temporary folder. There are several ways
you can view the contents of the temporary folder on a Windows-based PC:
•
To use the Windows Desktop, see Section 6.2.6.1.
•
To use Windows Command-line or Command Prompt, see Section 6.2.6.2.
•
After you confirm the firmware files are in the folder, proceed to Section 6.3 to upload
the firmware update to the CRS-500.
Summary of Contents for CRS-500
