Comtech EF Data CRS-500, Installation And Operational Manual

Page: 175 / 220

CRS-500 1:N Redundancy System
Revision 4
Serial Interface Operation 10–11 MN-CRS-500
Parameter
Type
Controller-to-Target
Instruction Code and Qualifier Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Switch Alarm
Mask
SAM= SAM? 1 byte Command or Query.
Sets or returns the Switch alarm mask in the form x, where:
0 = No faults masked
1 = Power Supply A faults masked
2 = Power Supply B faults masked
SAM=
SAM?
SAM*
SAM=x
Switch IP
Addresses
SIP= SIP?uu 20 bytes Command or Query.
Sets or returns the IP Address and Subnet Mask for the 10/100 BaseTx Ethernet
Management Port of traffic and backup modems, in the form uuxxx.xxx.xxx.xxxyy,
where:
uu = Unit #, where:
01-09 = IP Address for Traffic Modem 1 through 9
11= IP Address for Redundant Modem 1
10 = IP Address for Traffic Modem 10
xxx.xxx.xxx.xxx = IP Address of the modem
yy = Subnet Mask (00 through 31)
SIP=
SIP?
SIP*
SIP#
SIP=uuxxx.xxx.xxx.xxx
yy
Switching
Mode
SWM= SWM? 1 byte Command or Query.
Set or returns the switching mode in the form x, where:
0 = Manual Mode
1 = Auto Mode
SWM=
SWM?
SWM*
SWM=x
TMI/RMI
Types
N/A XMI? 11 bytes Query only.
Returns the TMI type detected in each slot position in the form xxxxxxxxxxy, where:
x = 0 through 9 or A through M, where:
0 = None present
1 = CRS-320 Rev A
2 = CRS-330
3 = CRS-340 Rev A
4 = CRS-340 Rev B
6 = CRS-320 Rev C
7 = Undefined
8 = CRS-341
9 = CRS-316
A = CRS-336
B = Undefined
C = CRS-315 (TMI)
D = CRS-325 (TMI)
N/A XMI=xxxxxxxxxxy