Comtech EF Data CRS-500, Installation And Operational Manual

Page: 176 / 220

CRS-500 1:N Redundancy System
Revision 4
Serial Interface Operation 10–12 MN-CRS-500
Parameter
Type
Controller-to-Target
Instruction Code and Qualifier Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
TMI/RMI
Types
(cont.)
E = CRS-335 (TMI)
F = CRS-345
G = CRS-365 Quad E1 for CDM-Qx
H = CRS Quad E1 D-sub for CDM-625
K = CRS-515
L = CRS-520
M = CRS-516
N = CRS-517
y = indicates the RMI type detected in slot II, where:
0 = none present
7 = CRS-310
D = CRS-307
E = CRS-306
F = CRS-305
I = CRS-505
J = CRS-510
NOTE: NOT ALL TMIs/RMIs ARE VALID FOR OPERATION IN PRESENT CRS-
500 CONFIGURATION (SYSTEM AT PRESENT IS COMPATIBLE ONLY WITH
CDM-625, CDM-625A, CDM-750, CDM-760 MODEMS)
QUERY RESPONSE EXAMPLE: >0000/XMI=21000000007{CR}{LF}