CRS-500 1:N Redundancy System
Revision 4
Ethernet Interface Operation
9–18
MN-CRS-500
9.5.4
Utility Pages
Select the
Info, Boot Slot,
or
Upload
tab to continue.
9.5.4.1
Utility | Info
Use this page to configure a variety of CRS-500 general operating parameters. This page also
provides status-only information on the operating firmware.
Figure 9-10. ‘Utility | Info’ Page
General Configuration
Unit Name –
Enter a Unit Name string of up to 24 characters. Once the desired string is entered
in this section, click
[Submit]
to save this setting.
Serial Number
(
read-only
)
–
The factory-assigned unit serial number is provided here for user
reference.
Software Revision
(
read-only
)
–
The version of the
Current Active Firmware Image
is provided
here for user reference.
Time and Date
Unit Time (hh:mm:ss) –
Enter a time using hh:mm:ss format in
Coordinated Universal Time
UTC+0 (where hh = hour [00 to 23], mm = minutes [00 to 59], and ss = seconds [00 to 59]).
Unit Date (dd/mm/yy) –
Enter a date using the European convention in the form dd/mm/yy
(where dd = day [01 to 31], mm = month [01 to 12], and yy = year [00 to 99]).
Click
[Submit]
to save.
Summary of Contents for CRS-500
