CRS-500 1:N Redundancy System
Revision 4
Ethernet Interface Operation
9–21
MN-CRS-500
9.5.4.3
Utility | Upload
Chapter 6. FIRMWARE UPDATE
Use this page to upload a firmware update file from the User PC into the CRS-500 controller’s
flash memory.
Figure 9-12. ‘Utility | Upload’ Page
Firmware Upload
Do these steps:
1.
Upgrade Image File
– Click
[Browse]
to locate and select the firmware file that was
obtained from the Comtech EF Data Web site (or provided by Comtech EF Data Product
Support). The firmware file should be extracted from the archive file upon download and
stored on the User PC in a temporary folder (directory).
2.
Click
[Upload]
to complete the upgrade process. The file will first upload to the
controller’s flash memory; the firmware upgrade bulk image file then loads into the
non-
active
image – that is, the image that is not currently selected as the active firmware
image (as it appears in the “
Boot From:”
field on the ‘
Utility | Boot Slot’
page).
Summary of Contents for CRS-500
