CRS-500 1:N Redundancy System
Revision 4
Ethernet Interface Operation
9–15
MN-CRS-500
9.5.2.3
Config | Remote Management
Use this page to set up and maintain usernames and passwords needed for communication with
the CRS-500 HTTP Interface.
Figure 9-7. ‘Config | Remote Management’ Page
Network Settings
MAC Address (read-only) –
The MAC is set at the factory to a guaranteed unique address that
cannot be modified by the user.
Management IP/Subnet, Gateway IP
– Enter the desired Management IP Address and Subnet,
and the Gateway IP Address as needed.
Click
[Submit]
to save.
Administrator Credentials
Enter the desired Administrator
Username
and
Password.
Both can be any alphanumeric
combination with a maximum length of 10 characters. Re-enter the designated password in the
Confirm Password
field.
Click
[Submit]
to save.
SNMP Configuration
This section displays administration information for the CRS-500 Simple Network Management
Protocol (SNMP) feature.
The default
SNMP Read Only Community
string is
public
.
The default
SNMP Write Community
string is
private
.
Click
[Submit]
to save.
You must reboot the system in order to implement any SNMP
Configuration changes.
Summary of Contents for CRS-500
