Comtech EF Data CRS-500, Installation And Operational Manual

Page: 100 / 220

CRS-500 1:N Redundancy System
Revision 4
Firmware Update 6–4 MN-CRS-500
6.2.2 Configure the Terminal Emulator Program
Read your terminal emulator program user guide or HELP feature for
operating and configuration instructions.
On the User PC – Open the terminal emulator program, and then configure the program’s serial
port communication and terminal display operation:
•
Baud Rate = 38400 bps
•
Data Bits = 8
•
Stop bits = 1
•
Parity = NO
•
Local Echo = ON
•
Port Flow Control = NONE
•
Display New Line Rx/Tx = CR
6.2.3 Apply Power to the CRS-500 System
Be sure to power on all modems installed in your CRS-500 1:N Redundancy System. Apply
power to the CRS-500 system components through the CSU rear panel power modules. The
CSU will be equipped with either a pair of standard CRS-541 AC Modules, or the optional CRS-
551 DC Modules.
(TOP) CSU Rear Panel with Standard CRS-541 AC Modules
(BOTTOM) CSU Rear Panel with Optional CRS-551 DC Modules
Figure 6-1. CRS-500 Power Connections