Comrex BRIC-Link II, Product Manual

Page: 41 / 104

TCP SETTINGS
BRIC-Link II performs best when using UDP for connec ons, but there are some rare circumstances when the
system may need to be switched over to TCP opera on. This advanced op on de
fi nes how incoming TCP calls
are handled. Outgoing calls are de fi ned as TCP when their pro fi le is con fi gured. BRIC-Link II normally listens for
incoming calls on both TCP and UDP ports, and chooses the fi rst to arrive. If a TCP call is detected, BRIC-Link II will
a empt to use the same TCP link to transmit in the reverse direc on.
Accept Incoming Connec ons - This allows turning TCP Auto Answer on and o ff . Disabling this func on means only
outgoing TCP calls can be established.
IP Port - Users have the op on of se ng the incoming TCP port number, which can be di ff erent than the UDP port
number.
Note: Warnings given above about changing port numbers also apply here—connec Ɵ ons with mismatched port
numbers will fail.