SECURITY SETTINGS
Remote Control Password
- This allows for se ng a user-de
fi
ned password for the
web GUI
and
Device Manager
to
control or con
fi
gure BRIC-Link II. The default password is
comrex
(lowercase). It is highly recommended to change
from the default password to something more secure. A new password can be entered here and must be set by
clicking “Apply Changes”.
Note:
Users should take note of any updated password
, as a forgo en password may require a “factory reset” for
users to regain access to BRIC-Link II (see
page 16
for details on how to reset BRIC-Link II to factory default, or
contact
Comrex Tech Support
for assistance.)
CONNECTIONS
Unit Name
- Users are encouraged to name their codecs here. The default name of a codec is the unique
Switchboard ID (MAC address) of the unit. By changing this to something familiar and unique (e.g., “Roving
reporter”, “Weather guy:, etc.), you will see this name re
fl
ected in several places:
1. In the browser used to show the remote control page;
2. In Comrex provided u lity so ware such as
Remote Control
and
Device Manager
;
3. In Switchboard Traversal Server Buddy lists.
Incoming Connec on Password
- This allows users to de
fi
ne a password that must be a ached to all incoming
connec ons before they are accepted. Remote units placing connec ons into this BRIC-Link II must know this
password and apply it to the outgoing stream. Leaving the
fi
eld blank will disable this func on. Note: Connec ons
made with Switchboard do not use this func on.
Always Connect to Remote
- This
fi
eld is available to designate a remote for “always on” opera on. This is useful in
“nailed up” environments, where a signal is required across the link 24 hours a day. To assign an
always on
remote,
simply pull down the menu and select which remote to designate as
Always On
. A connec on will be made and
sustained to the chosen remote. Remote connec ons must be created in the
Connec ons Tab
before they can be
assigned to this func on. Note: This func onality is not supported in Switchboard Connec ons.
Show O
ffl
ine Switchboard Units
- If enabled, shows o
ffl
ine Switchboard remotes in the remote list.
CONTACT CLOSURES
CC Connect Status
-
Allows for the ac va on of contact closure #4 out when connected. If this is selected, the
signal follows the BRIC-Link II front panel “Ready” light, and CC4 will be
closed
when a valid connec on is present
and
open
when no connec on is present.
Connect on CC1 (, CC2, CC3 and CC4)
- Allows for assigning a par cular remote that will be connected when its
corresponding contact closure is engaged. To assign a remote connec on to a contact closure, simply pull down the
menu box under the desired closure and select the proper remote. A connec on a empt will be made whenever
the contact is triggered, and will disconnect whenever the contact is released.
Summary of Contents for BRIC-Link II
