Comrex BRIC-Link II, Product Manual

Page: 99 / 104

U.S. AND CANADIAN REGULATORY INFORMATION FOR THE BRIC LINK II
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA, as well as
the applicable Industry Canada technical speci
fi ca ons. On the bo om of this equipment is a label that contains,
among other informa on, a product iden fi er in the format
US:DXDMD01BACCRK US:DXDMD01BACCRK . If requested, this number must
be provided to a U.S. telephone company.
Telephone line connec ons to the Comrex BRIC-Link II are made via an RJ11C jack. A plug and jack used to connect
this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compa ble modular jack that is also compliant. product. It is designed to be connected to a compa ble modular jack that is also compliant. See installa on
instruc ons for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. The sum of RENs should
not exceed
fi ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. The REN for the Comrex BRIC-Link II is
0.1 0.1 , and is shown as the
digits represented by ## in the product iden fi er
US:DXDMD##BACCRK US:DXDMD##BACCRK .
If the Comrex BRIC-Link II causes harm to the telephone network, the telephone company will no fy you in advance
that temporary discon nuance of service may be required. But if advance no ce isn’t prac cal, the telephone
company will no fy the customer as soon as possible. Also, you will be advised of your right to
fi le a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes in its facili es, equipment, opera ons, or procedures that could a ff ect
the opera on of this equipment. If this happens the telephone company will provide advance no ce in order for
you to make necessary modi
fi ca ons to maintain uninterrupted service.
If trouble is experienced with the Comrex BRIC-Link II, please contact Comrex Corpora on at 978-784-1776
for repair or warranty informa on. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment un l the problem is solved.
No user serviceable parts are contained in this product. If damage or malfunc on occurs, contact Comrex
Corpora on for instruc ons on its repair or return.
Connec on to party line service is subject to state tari ff s. Contact the state public u lity commission, public service
commission or corpora on commission for informa on. This equipment cannot be used on telephone company
provided coin service.
If you have specially wired alarm equipment connected to the telephone line, ensure the installa on of the Comrex
BRIC-Link II does not disable your alarm equipment. If you have ques ons about what will disable alarm equipment,
consult your telephone company or a quali
fi ed installer.