Comrex BRIC-Link II, Product Manual

Page: 16 / 104

DIP SWITCH SETTINGS
BRIC-Link II has a set of eight DIP switches used for audio and indicator con fi gura on.
DIP Switch # Func on Default (Down)
Analog/AES Input Select Analog
Analog/AES Output Select Analog
Audio Loopback* Disabled
Level LEDs TX/RX Select TX
Headphone out select TX/
RX RX
6 Future Use
7-8 Factory Reset
* This func on connects the send and receive audio together before it touches the encoder—the audio is digi zed
and converted back to analog, but not compressed or converted to a stream.
RESET TO FACTORY DEFAULT USING DIP SWITCHES
To factory reset your device using DIP switches, follow these steps:
1 Put DIP switches 7 & 8 up.
2 Press the RESET bu on once, then wait un l the Le , Right, and Power LED fl ash red and
green (can take up to 40 seconds).
3 Put DIP switches 7 & 8 down.
4 Press the RESET bu on once.