3-13
Dismounting the Camera
Mounting the Camera
Chapter 3: Installation
Dismounting the Camera
If you like to remove the mounted camera from its mounting surface, prepare one flat blade screwdriver and
one Phillips screwdriver, and then follow the instruction below to dismount the camera.
Step 1:
Detach the plastic mounting bracket from the metal mounting plate that has been screwed on the
mounting surface, by inserting a flat blade screwdriver into the rectangular hole seen on the wide
end of the plastic bracket base, and then pressing the screwdriver downward.
Step 2
: Use a Phillips screwdriver to unscrew the metal mounting plate from the mounting surface.
OK
2
1
Caution!
Do not pull a mounted camera off the mounting surface by force, as
doing so may damage the bracket base permanently and render future
camera mounting impossible.
Summary of Contents for TN65
