COMPRO TN65, User Manual

Page: 51 / 76

6-11 Recording Setup Event Setup
Chapter 6: Configuration
Audio Detection
Configure the sensitivity level in audio detection used by event trigger. Available options: low, medium,
high. The audio detection function on this IP camera works by measuring the volume level. Each different
sensitivity stands for a particualr threshold of triggering.
Sensitivity Threshold of Triggering
Low Approx. 65~70 dB
Medium Approx. 80~85 dB
High Approx. 100~105 dB
Recording Setup
In addition to the capability of storing event snapshots to local microSD Card slot (card not included), this
camera also supports storage of video clips (audio may be included if enabled) to the local storage device.
To configure the recording function, go to the main setup page and click [Recording Setup]. Then follow the
steps below.
1. Recording Setting: Here it displays the status of your microSD card among other options. Click [Next] to
proceed.
microSD Card Status Status verification
microSD
Card Capacity Show available and total space in the card
Format Click to format microSD card
Enable Recording during
network failure Check to allow forced recording to microSD card when network
connection fails
Table 6-3. microSD card setup
2. Event Selection: Click on [Next] to set up recording methods: "Event-based" or "Disable Recording."
3. Event-based Recording: Start recording when motion, audio and I/O are triggered (multiple
choices). Recording length: 60~3,600 sec, default 60 sec.
4. Disable Recording: Turn off recording function.
Having made your settings, press [Save] button to save your settings. To play back the recordings stored on
the SD card, go to [Setup], and click on [Recording History] located on the left menu.
Note:
• This Compro IP camera uses a First In First Out storage method.
Once the SD card is full, the oldest files will automatically be
overwritten.
• If you want to record video clips of detected motion to SD card, you
need to set at least a motion detection region before setting up
event-based recording in "Recording Setup."