COMPRO TN65, User Manual

Page: 55 / 76

8-1 Information <頁頁頁頁頁頁>
Chapter 8: Maintenance
Here it provides the current information about your IP camera and the access to history log as well as system
maintenance functions.
Information
Here you can check the firmware version as well as various settings of your IP camera .
Log
Here you can check the system log of your network camera. Press [Clear Log] to clean up system log.
Maintenance
You can reboot your IP camera, change UI language, export/import user profile, reset to factory default
settings, or update camera firmware (after you download the latest firmware from Compro’s website).
Figure 8-1. Maintenance page
Reboot Camera
Press the [Reboot] button to reboot your camera system. You can also opt for power cycling your camera in
case you find your camera has been acting weird.
Profile Management
The profile management feature allows installers and users to set up a group of cameras with similar
configurations at great ease. After the current camera is properly configured, users can export current
camera's configuration to a profile on PC and then load it into other cameras, thereby making least changes
possible like changes on IP address or a few other settings that might need to be modified individually when
installing a surveillance system. In addition, this feature can also be considered as a backup mechanism for
future service need. For instance:
1. After the current camera is properly configured, go to [Maintenance] > [Profile Management], and click
on [Export] to download camera profile to a user-specified location.
2. To load an existing profile into a different camera, log in to the maintenance page of a different camera,
press [Browse…] and locate the profile you wish to load, and then click on [Import] to proceed.
3. Camera will start to reboot, which will take approximately 60 seconds to complete. Do not interrupt
Chapter 8: Maintenance