COMPRO TN65, User Manual

Page: 48 / 76

6-8 Event Setup Event Setup
Compro TN65/TN65W Network Camera
UPnP
Check here to enable/disable the UPnP function on your IP camera installed on your local network. Also, you
can change the device name here. If your operating system supports Universal Plug and Play (UPnP™) and
DHCP is in use on current network, this Compro IP camera will be automatically detected and added to My
Network Places on your Windows. If you want to use the IGD (Internet Gateway Device) protocol on your IP
camera, please check the [Enable IGD] box to enable it.
Note:
If you want to enable the UPnP™ service on your Windows, please
execute the “Add or Remove Programs” item found in “Control Panel”,
and after “Add or Remove Programs” window appears, click on “Add/
Remove Windows Components” and then double-click on “Networking
Services” item and check “UPnP User Interface” box and proceed to
install the component.
RTP
If you want to broadcast video using RTP (Real-time Transport Protocol), you can set up the port range, video/
audio address and port number here.
Event Setup
When an event happens, a snapshot can be instantly sent to your E-mail account, ftp server, image server, or
SMS server to warn you about what’s happened.
In order to properly set up the event function, you must:
1. First set up the event server based on your needs: E-mail, FTP, or Image server.
2. Once the event servers are configured, you can then go to the trigger setup page to create an event
trigger and the event action(s) in response.
3. In the motion detection page, click and drag on the preview image to create a detection region and
then click [Save].
Event Server Setup
Here it provides the configurations of various event servers available on the camera. Please click on the event
server you want to configure and provide necessary information.
Email server
Email server supports standard SMTP on SSL-protected webmail platforms such as Hotmail (Windows Live)
and Google Mail (Gmail). To use this function, go to [Event Server Setup] > [Email Event Server Setup], and
enter the SMTP server address and port respectively. Then enter your user name and password, and the
E-mail subject as you like. As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as follows:
Platform SMTP Server Port (for SSL)
Hotmail smtp.live.com 587
Google Mail smtp.gmail.com 465
Table 6-1. Webmail setting
For [Authentication Method], select [Login]. Enter a complete email address into sender/receiver field:
xxxx@xxxx.com. Other SSL webmail platforms have not been tested.